everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everli ght.com rev. 1 page: 1 of 10 device no. : dse-63b-005 prepared date:05-jan-2006 prepared by: venis wu technical data sheet surface mount device (power top view led) 67-31b/ysc-aw1x2b9z5/2t features B plcc-3 package. B high flux output. B high current capability. B white package. B optical indicator. B colorless clear window. B ideal for backlight and light pipe application. B inter reflector. B wide viewing angle. B suitable for automatic placement equipment. B suitable for reflow and wave solder processes. B available on tape and reel (8mm tape). B pb-free. B the product itself will remain within rohs compliant version. descriptions the 67-31a series is available in soft orange, red and yellow. due to the package design, the led has wide viewing angle and optimized light coupling by inter reflector. this feature makes the ideal for light pipe application. the low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. applications B indicator and backlight for audio and video equipment. B indicator and backlight in office and family equipment. B flat backlight for lcd?s, switches and symbols. B light pipe application. B general use. device selection guide chip material emitted color resin color algainp brilliant yellow water clear
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everli ght.com rev. 1 page: 2 of 10 device no. : dse-63b-005 prepared date:05-jan-2006 prepared by: venis wu 67-31b/ysc-aw1x2b9z5/2t package dimensions note: the tolerances unless mentioned is 0.1mm ;unit = mm
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everli ght.com rev. 1 page: 3 of 10 device no. : dse-63b-005 prepared date:05-jan-2006 prepared by: venis wu 67-31b/ysc-aw1x2b9z5/2t absolute maximum ratings (t a =25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f 70 ma peak forward current (duty 1/10 @1khz) i fp 150 ma power dissipation pd 220 mw electrostatic discharge(hbm) esd 2000 v operating temperature t opr -40 ~ +85 storage temperature t stg -40 ~ +90 soldering temperature tsol reflow soldering : 260 for 10 sec. hand soldering : 350 for 3 sec. electronic optical characteristics : parameter symbol min. typ. max. unit condition luminous intensity i v 1120 ----- 2850 mcd i f =50ma viewing angle 2 1/2 ----- 60 ----- deg i f =50ma peak wavelength p ----- 591 ----- nm i f =50ma dominant wavelength d 586 ----- 595 nm i f =50ma spectrum radiation bandwidth ----- 15 ----- nm i f =50ma forward voltage vf 2.15 ----- 2.75 v i f =50ma reverse current i r ----- ----- 10 a v r =5v notes: 1.tolerance of luminous intensity 11% 2.tolerance of dominant wavelength 1nm 3.tolerance of forward voltage 0.1v
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everli ght.com rev. 1 page: 4 of 10 device no. : dse-63b-005 prepared date:05-jan-2006 prepared by: venis wu 67-31b/ysc-aw1x2b9z5/2t bin range of dominant wavelengths bin code min. max. unit condition d3 586 589 d4 589 592 d5 592 595 nm i f =50ma bin range of luminous intensity bin min max unit condition w1 1120 1420 w2 1420 1800 x1 1800 2250 x2 2250 2850 mcd i f =50ma bin range of forward voltage group bin min max unit condition 2 2.15 2.35 3 2.35 2.55 b9 4 2.55 2.75 v i f =50ma notes: 1.tolerance of luminous intensity 11% 2.tolerance of dominant wavelength 1nm 3.tolerance of forward voltage 0.1v
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everli ght.com rev. 1 page: 5 of 10 device no. : dse-63b-005 prepared date:05-jan-2006 prepared by: venis wu 67-31b/ysc-aw1x2b9z5/2t typical electro-optical characteristic curves
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everli ght.com rev. 1 page: 6 of 10 device no. : dse-63b-005 prepared date:05-jan-2006 prepared by: venis wu 67-31b/ysc-aw1x2b9z5/2t label explanation cat: luminous intensity rank hue: dom. wavelength rank ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is 0.1mm,unit = mm
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everli ght.com rev. 1 page: 7 of 10 device no. : dse-63b-005 prepared date:05-jan-2006 prepared by: venis wu 67-31b/ysc-aw1x2b9z5/2t carrier tape dimensions; loaded quantity per reel 2000 pcs/reel - + + + note: tolerances unless dimension 0.1mm unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everli ght.com rev. 1 page: 8 of 10 device no. : dse-63b-005 prepared date:05-jan-2006 prepared by: venis wu 67-31b/ysc-aw1x2b9z5/2t reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level 90% ltpd 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260 5 min. 5 sec. 6 min. 22 pcs 0/1 2 temperature cycle h : +100 15min 5 min l : -40 15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : -10 5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40 1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 20 ma / 25 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85 /85%rh 1000 hrs. 22 pcs. 0/1
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everli ght.com rev. 1 page: 9 of 10 device no. : dse-63b-005 prepared date:05-jan-2006 prepared by: venis wu 67-31b/ysc-aw1x2b9z5/2t precautions for use 1. over-current-proof customer must apply resistors for protection, ot herwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the leds should be kept at 30 or less and 90%rh or less. 2.3 after opening the package: the led's floor life is 1 year under 30 or less and 60% rh or less. if unused leds remain, it should be st ored in moisture proof packages. 2.4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 120 sec. max. 1~5 c / sec. pre-heating 180~200c 60 sec. max. above 220c 260c. max. 10 sec. max. 1~5 c / sec. 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put st ress on the leds during heating. 3.4 after soldering, do not warp the circuit board. 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be car eful because the damage of the product is often started at the time of the hand solder.
everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight .com rev. 1 page: 10 of 10 device no. : dse-63b-005 prepared date:05-jan-2006 prepared by: venis wu 67-31b/ysc-aw1x2b9z5/2t 5.repairing repair should not be done after th e leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiw an, r.o.c http://www.everlight.com
|
